Guidelines on how to Flash a Phone

There is a good possibility that your phone will become a little sluggish and malfunctioning after extended use. By flashing a new custom ROM onto the device, its performance can be improved.

Flashing an MTK Android device

• Before proceeding, you must obtain and install the MTK driver on your computer. After that, download
• Download the firmware or ROM that you intend to utilise for the purpose of flashing.
• Download and extract the SP Flash utility onto your computer.
• To access the SP Flash tool interface, run the Flash_tool.exe programme.
• Click “Download” and then “Scatter loading” in the SP Flash utility window.
• Next, navigate to the downloaded file and select the “Open” option.
• Choose “Download” to conclude the SP Flash utility window.
• Connect your device to your computer. As soon as it is identified, the flashing procedure will conclude.
• Select the green circle labelled “OK Download” by clicking on it.
• Disconnect and allow your phone to restart.

Flashing a Samsung Galaxy device

• After installing and downloading dr.fone, proceed to run it.
• Tap ‘Repair’ from the primary menu to establish a connection between the repaired device and the system.
• Select ‘Android Repair’ from the menu, and then click ‘Start’ to initiate the flashing process for the dead Android device.
• Select the device name, model, and brand, among other pertinent information, on the device information screen.
• Subsequently, click the ‘Next’ button.
• Enter ‘000000’ to validate your inputs.
• Enter Download mode on the Android device to initiate the repair process. Prior to repairing, ensure that your
• Android device is booted in Download mode.
• Activate the device by depressing the ‘Volume Down’, ‘Home’, and ‘Power’ buttons simultaneously for a duration of 5-10 seconds, assuming the device has a dedicated ‘Home’ button.
• Press and hold the ‘Volume Up’ button to unlock all of them and enter ‘Download’ mode.
• When an Android device lacks a ‘Home’ button, power it off and simultaneously press and hold the ‘Volume Down’, ‘Bixby’, and ‘Power’ buttons for a duration of 5 to 10 seconds before releasing them. To access ‘Download’ mode, press the ‘Volume Up’ button.
• Selecting the ‘Next’ icon will commence the firmware download process.
• Upon firmware verification and installation, dr.fone –Repair (Android) initiates the flashing process for the malfunctioning Android device. Following that, every Android system issue will be resolved.